Bose SoundTouchStereo JC Wi-Fi Owner's Guide - Page 22
Performing the ADAPTiQ, calibration
![]() |
View all Bose SoundTouchStereo JC Wi-Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ADAPTiQ® Performing the ADAPTiQ® calibration What you need: ADAPTiQ® headset SoundTouch™ controller The ADAPTiQ® audio calibration system customizes the sound of your system to the acoustics of your listening area. Note: You must complete SoundTouch™ setup before performing ADAPTiQ® audio calibration. See "Adding the system to your Wi-Fi® network" on page 10. To perform a calibration, you need about ten minutes when the room is quiet. While wearing the special headset, the system prompts you to sit in five different locations in your listening area as the system takes measurements in each one. Audio prompts from the system guide you through the process. 1. Plug the ADAPTiQ® headset into the Audio IN connectors in the back of the Acoustimass® module. Be sure to match the colors, red-to-red and white-to-white. Right (R, red) Left (L, white) ADAPTiQ® headset 2. Put the headset on your head so the left and right sensors rest above your ears. This headset allows the system to hear exactly what you hear. 22 - English
![](/manual_guide/products/bose-soundtouchstereo-jc-wifi-owners-guide-98d1493/22.png)