Bose Videowave III Entertainment Installation Guide - Page 11
Caution
View all Bose Videowave III Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Using the same bolts, attach the two straps to the back of the monitor. Physical Setup 4. Hold the bracket on the end of each strap against the wall a minimum of 18 in. (46 cm) or maximum of 24 in. (61 cm) above the tabletop. In the center of each wall stud, mark the location of the two holes in the bracket. 24" max 18" min CAUTION: The included screws are for use only into woodstudded wall constructions with 1 in. (maximum) drywall. For all other types of wall construction, please contact a professional installer. Use caution to avoid any electrical or plumbing lines running through the studs. 3. Locate the two wall studs closest to the straps. Each strap should be attached to the wall stud closest to it. CAUTION: Do not attach both straps to the same stud. Tabletop 5. Using a 7/64 in. (3 mm) drill bit (not included), drill 4 pilot holes. 6. Secure each bracket to the wall using 2 of the provided screws. English - 11