Bose Videowave III Entertainment Installation Guide - Page 12
Wall-mounting the monitor
View all Bose Videowave III Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Physical Setup 7. Push the monitor back to within 1-4 in. (2.5-10 cm) from the wall. 1-4 in. (2.5-10.0 cm) Wall-mounting the monitor The VideoWave® III entertainment system is compatible with any VESA certified bracket that uses a 400 mm x 400 mm screw pattern. The mount must be able to support the weight of the monitor. The 46 in. monitor weighs 120 lbs. (54 kg). The 55 in. monitor weighs 135 lbs. (61 kg). Articulating wall mounts are not recommended, because the changes in position may affect the acoustics. If the VideoWave system is mounted over a fireplace, it must be placed over a mantle that is a minimum of 6 in. (15.3 cm) deep to protect the system from overheating. 1. On the rear panel of the monitor, firmly pull out on the bottom of the connector cover (A), and pull down (B) to remove it. Tabletop 8. Tighten the straps to remove any slack between the monitor B and the wall. 9. Bundle the remaining length of the straps and secure them out of reach behind the monitor. A 12 - English