Boss Audio 508UAB User Manual - Page 11

BLUETOOTH OPERATION Pair and Connect Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile phone for the time, you must pair and connect the two devices as follows: 1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no device is connected. To begin pairing, enable BT mode on your mobile phone. 2. When the phone the car audio system, the BOSS AUDIO name will be displayed. 3. Choose the BOSS AUDIO from the device list to pair and connect with the car audio system. Upon the BT logo will stop 4. When pairing is complete, the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays music. Make a Call To make a call, dial the call directly from the paired mobile phone. Redial Last Dialed Number Press and hold the button on the control panel to redial the last dialed phone number. Answer a Call • When the mobile phone is called, the incoming telephone number displays in the LCD. • To receive the call, press the button on the control panel. • To reject the call, press the button on the control panel. End a Call To end an active call, press the button. Switch Audio Between Car and Phone During a call, press the VOL knob/button to switch the audio source from the car audio system back to your mobile phone. Adjust Talk Volume • During a call, use VOL knob or VOL + and VOL - buttons to adjust the volume level. • Use the MUTE button to mute sound. Bluetooth Music (A2DP) 1. Press the /SRC button to enter BT mode and display media in the LCD. 2. When a mobile device is paired, music played through that device will automatically be heard through the car audio system. 3. Press the >>| or ||| button to pause or resume music playback. 9