Boss Audio 508UAB User Manual - Page 12
Remote Control
View all Boss Audio 508UAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REMOTE CONTROL Remove Insulating Sheet The remote control comes with an insulating sheet attached to the underside of the remote control, as illustrated on the right. The remote control will not work until the insulating sheet is removed. Replace Lithium Battery Cell 1. When the lithium cell battery becomes weak, replace it as illustrated on the right. 2. Press and hold the movable block in the direction indicated by arrow 1. At the same time, pull the cell holder out of the remote control in the direction indicated by arrow 2. 3. Replace the old cell with a new one, making sure the (+) polarity is facing upward. 4. Re-insert the cell holder into the remote control. - Cell leakage may cause damage to the remote control. ! - Do not throw cells into as this may cause an explosion. - Keep battery cells out of reach of children. Remote Control Operation Position the emitting window of the remote control toward the sensor window of the unit. • The operation angle for front panel remote control reception is about 30 degrees. • The distance between the emitting window of the remote control and the sensor window of the unit should remain less than 5 meters. 10