Boss Audio 628BCK 609UAB_EN_UM.PDF - Page 7

General Operation Adjust Menu Options (SEL) • Press SEL button repeatedly to cycle through the following adjustable audio functions: - ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings. - BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7 Note: BASS and TREBLE settings are only enabled when EQ setting is turned OFF. - BALANCE:L7, L6,~, L1, L=R, R1,~,R6, R7 - FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7 - EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT - Loudness: LOUD ON/OFF - DX/LOCAL: Enables or disables the local broadcast mode (LOCAL). - Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies. - CLOCK 12/24: Select between 12 hours and 24 hours display. Note: If 12 hour display is selected , AM= Morning; PM= Afternoon - AREA US/EU: This car radio is equipped the USA / Europe frequency. Rotate the volume knob to switch between USA and Europe frequency. The system will change the frequency setting in about 3 seconds. • Rotate the VOL knob to adjust the selected item. Setting the Clock Press the CLOCK button to display time. Press and hold the CLOCK button, the hours digits start flashing on the display. Set hours by rotating the VOL knob. Briefly press the CLOCK button. The minute digits start flashing. Set minutes by rotating the VOL knob. Finally press the CLOCK button to confirm your settings. LCD Display Mute On/Off In power on mode, briefly press the MUTE button to toggle mute on or off. USB Port Hands-free Microphone Auxiliary Input Jack Reset Push the RESET button with a thin object with a pointed end to reset all parameters to factory default settings.This function may be used when the LCD does not display normally or sound is distorted, or when any of controls are disabled. 5