Boss Audio 628BCK 609UAB_EN_UM.PDF - Page 8

Radio Operation Switch Between USA area and Europe area Frequency In radio mode, press the SEL button to enter the switch state of the US (USA) and EU(europe)frequency, then rotate it to switch between US(USA) and EU(europe) frequency. The system will change the frequency setting in about 3 seconds. Change Bands In radio mode, shortly press the BAND button to switch between the FM1(F1), FM2(F2), FM3(F3) and AM1(A1), AM2(A2) bands. To Store / Recall Preset Stations The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for atotal of 30 preset stations. - To memorize a station: Press and hold the desired preset buttons (1-6) to save a radio station. - To recall a preset station: Briefly press the respective station button (1-6) to recall the corresponding preset station. Manual Tuning In the radio mode: Press and hold the or button to enter the manual tuning mode. In manual tuning mode, briefly press the or button to search the next or previous frequency step by step. Seek Tuning In radio mode, press the or button, the automatic search will start, it will search upward or downward for the strong signal radio station within the current band. The auto searching will stop until find a station. Automatic Store Station / preset station scan ( ) Press and hold the button to store 18 FM stations and 12 AM stations automatically. Briefly press the button to recall each preset station that stored in the memories in each band. LOCAL/DX In urban areas, most stations are strong enough and "LOCAL ON" mode should be selected. Switch to LOCAL OFF mode to search for stations with weaker signals. Press the LOC button on the remote control to choose local or distant reception mode. STEREO/MONO FM station is received in stereo mode. However, if the signal is weak or reception is not asgood as you would like, switching to MONO mode usually improves the overall sound quality. Press the ST button on the remote control to choose FM STEREO or MONO audio effect. 6