Boss Audio BV10.1B User Manual - Page 15

Radio Operation 1. To enter RADIO mode(SOURCE button or RADIO icon) When you use SOURCE button or source menu (tapping RADIO icon) to enter RADIO mode, it will display radio interface as follows: FM1 87.50 MHZ 87.50 90.10 98.10 106.10 107.00 88.50 * Some icons on radio interface correspond with the buttons on remote control or control panel as follows: SWF icon = SW button(remote control)(long pressing) LOUD icon = EQ button(remote control)(long pressing) MUTE icon = MUTE button and icons = VOL- and VOL+ buttons = VOL knob EQ icon = EQ button : To enter source menu. icon : press it to pop up BT PHONE interface(after pairing and connecting a mobile phone with bluetooth function) 2. To switch between bands (BAND) The BAND icon or button can switch between bands of FM1, FM2, FM3, AM1 and AM2, and the word FM1,FM2,FM3,AM1 or AM2 will be displayed on screen. 3. To search for a station ( and icons or v and ^ or |>| buttons) 1) Long touching or icon or long pressing v or ^ button on remote control or long pressing |>| button on control panel can automatically search down or up for an available station beginning from the current frequency. 2) Briefly touching or icon or briefly pressing v or ^ button on remote control or briefly pressing |>| button on control panel can manually search down or up for a your desired station beginning from the current frequency. 4. To preset and scan all memory stations (APS icon or A/PS button) 1) When long touching APS icon or long pressing A/PS button on remote control , the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished, and the 6 strongest stations are preset to corresponding preset number memory bank for the current band. The presetting function can be implemented in selected FM or AM band. (It can presets 3x6 stations for FM and 2x6 stations for AM in all) 2) When briefly touching APS icon or briefly pressing A/PS button, the radio scans for each preset station in FM or AM band from NO.1 bank, each preset station broadcasts for 5 seconds. After finishing a circle of scanning, it will resume broadcasting the station in NO. 1 bank. NOTE: In FM band, FM1,FM2 and FM3 are preset and scaned as one band at a time; In AM band, AM1 and AM2 are preset and scaned as one band at a time. -13-