Boss Audio BV10.1B User Manual - Page 4

INSTALLATION STEPS 1. Remove the chassis from Slide Bracket Housing; 1) Press the REL button to release the control panel ; REL button 2) Hold the right side of the control panel to pull it rightwards a little and then to you for removing it ; 1 2 3) Remove the PLASTIC FRAME from the chassis (see the Installation diagram); 4) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till they click(see the Installation diagram); 5) Pulling the two KEY PLATES to remove the chassis from the Slide Bracket Housing ; 2. Mount the Sliding Bracket Housing in the position of car multimedia system and bend some tabs of Sliding Bracket Housing to fix it. 3. Connecting all wires: 1) Connecting all wires according ot the wiring diagram on next page; -2-