Boss Audio MCK632WB.6 MR632UAB_EN_UM.PDF - Page 5

Installationcont.

Get Boss Audio MCK632WB.6 PDF manuals and user guides View all Boss Audio MCK632WB.6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

INSTALLATION(CONT.) - Only use speakers with 4 ohms impedance. ! - Do not attach the control panel to the chassis before wiring is complete. - The maximum current of the Amp Remote trigger is 200mA. Wiring Connections WIRING DIAGRAM Radio Antenna White:Front Left PRE-AMP Output Red: Front Right PRE-AMP Output Red: Rear Right PRE-AMP Output White: Rear Left PRE-AMP Output CAUTION +12V DC NEGATIVE GROUND Purple + Rear Right Speaker Purple/Black - Gray + Front Right Speaker Gray/Black - 15 15A Green + Rear Left Speaker Green/Black - White + Front Left Speaker White/Black - ACC + (Red) GND - (Black) ANT + (Blue) Power B + (Yellow) Uninstall the Main Unit 1. Remove the plastic trim out from the main unit. 2. Insert a bracket key into the left and right side of the main unit and draw the unit out of the mounting sleeve. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
WIRING
DIAGRAM
CAUTION
+12V DC
NEGATIVE
GROUND
15
White:Front Left PRE-AMP Output
White: Rear Left PRE-AMP Output
Red: Front Right PRE-AMP Output
Red: Rear Right PRE-AMP Output
Radio Antenna
15A
Purple +
Rear Left Speaker
Front Left Speaker
White +
Green +
Green/Black -
White/Black -
Gray/Black -
Gray +
Front Right Speaker
Purple/Black -
Rear Right Speaker
ACC + (Red)
GND -
(Black)
ANT + (Blue)
Power B + (Yellow)
INSTALLATION(CONT.)
3
- Only use speakers with 4 ohms impedance.
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the Amp Remote trigger is 200mA.
Wiring Connections
!
Uninstall the Main Unit
1.
Remove the plastic trim out from the main unit.
2.
Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.