Boss Audio MCK632WB.6 MR632UAB_EN_UM.PDF - Page 8

&12.fb, Usb Port, Aux In Jack, Reset, Bnd/ams

Page 8 highlights

OPERATION 11.FF( ) &12.FB( ) In the radio mode: Long press the or button for more than 2 seconds, the unit will switch to manual tuning mode, briefly press the or button to search the next or previous frequency step by step. Short press the or button, the automatic search will start, it will search upward or downward for the strong signal radio station within the cuttent band. The auto searching will stop until find a station. In the USB or SD card mode: Briefly press the or button to play the the next or previou track. Press and hold the or button to fast forward or fast backward. 13.BND/AMS In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1, FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1aF2aF3 for FM band, and A1 A2 for AM band will be shown on the LCD display. Press the BND/AMS control to scan each preset station in each band. check When the 6 strongest stations will be stored into AMS button on the remote During USB or SD playback, press and hold the BND/AMS button to enter track search mode, the ³75.´ZLOODSSHDURQWKHGLVSOD\5RWDWH92/NQREWRVHOHFWWKH³¿UVWQXPEHU´7KHQSUHVVWKH EXWWRQWRPRYHWKH³¿UVWQXPEHU´WRWKHOHIWDQGHQWHUWKHQH[WQXPEHU)LQDOO\SUHVVWKH6(/EXWWRQWR confirm and play the selected track. If no any operation in 5 seconds,it will play the current track. 14. MUTE flash on the LCD 15. USB PORT 16. AUX IN JACK 17. o detach 18. RESET To reset all parameters to factory default values. Press the button to detach the control panel form the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET hole. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

OPERATION
6
11.FF(
) &12.FB(
)
In the radio mode:
Long press the
or
button for more than 2 seconds, the unit will switch to manual tuning
mode, briefly press the
or
button to search the next or previous frequency step by step.
Short press the
or
button, the automatic search will start, it will search upward or downward
for the strong signal radio station within the cuttent band. The auto searching will stop until find a
station.
17.
14. MUTE
15. USB PORT
16. AUX IN JACK
18. RESET
To reset all parameters to factory default values.
Press the
button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the
RESET hole.
flash on the LCD
o
detach
13.BND/AMS
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1
F2
F3 for FM band,
and A1
,
A2 for AM band will be shown on the LCD display.
control to scan each preset station in each band.
AMS button on the remote
Press the BND/AMS
check
During USB or SD playback, press and hold the BND/AMS button to enter track search mode, the
confirm and play the selected track. If no any operation in 5 seconds,it will play the current track.
When the 6 strongest stations will be stored into
In the USB or SD card mode:
Briefly press the
or
button to play the the next or previou track.
Press and hold the
or
button to fast forward or fast backward.