Boss Audio MCK632WB.6 MR632UAB_EN_UM.PDF - Page 9

BLUETOOTH OPERATION Pair and Connect Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile phone for the time, you must pair and connect the two devices as follows: 1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no device is connected. To begin pairing, enable BT mode on your mobile phone. 2. When the phone the car audio system, the "BOSS MR632UAB" will be displayed. 3. Choose the "BOSS MR632UAB" from the device list to pair and connect with the car audio audio system. Upon the BT logo will stop 4. When pairing is complete, the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays music. Make a Call ‡To make a call, dial the call directly from the paired mobile phone. ‡To make a call with this Bluetooth handsfree system. a) When linking up the Bluetooth mobile phone to this car audio handsfree system, press the button to access the dial telephone number mode, then press the "0~9", * and # button on the remote control to input the telephone number, the entered number will be shown on the LCD. b) If a number has been incorrectly input, press the DEL button or button to delete it. c) Press the button to make outgoing call. Redial Last Dialed Number Press and hold the button on the control panel to redial the last dialed phone number. Answer a Call ‡ When the mobile phone is called, the incoming telephone number displays in the LCD. ‡ To receive the call, press the button on the control panel or remote control. Reject or End a Call To reject the call or end an active call, press the button. Switch Audio Between Car and Phone During a call, press the VOL knob/button to switch the audio source from the car audio system back to your mobile phone. Adjust Talk Volume ‡ During a call, use VOL knob or VOL + and VOL - buttons to adjust the volume level. ‡ Use the MUTE button to mute sound. Audio Streaming (A2DP) 1. Press the /SRC button to enter BT mode and display pause in the LCD. 2. When a mobile device is paired, music played through that device will automatically be heard through the car audio system. 3. Press the >>| or ||| button to pause or resume music playback. 7