Brother International 1920CN Service Manual - Page 152
WSW29, WSW30, Selector 4 is applicable to the European version only.
UPC - 012502607137
View all Brother International 1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
WSW29 (Function setting 7) Selector No. 1 | 6 7 8 Function Not used. Impedance switching control in pulse dialing Beep when the memory area for the activity report becomes full Setting and Specifications 0: OFF 0: No 1: ON 1: Yes NOTE: Selectors 7 and 8 are applicable to the European version only. l Selector 8: Beep when the memory area for the activity report becomes full If this selector is set to "1," the machine will beep when the memory area for the activity report becomes full (as well as displaying a message on the LCD, prompting the output of the activity report). Selector No. 1 | 3 4 5 6 | 8 WSW30 (Function setting 8) Function Setting and Specifications Not used. Duty cycle control of pulsed current for the heat-fixing unit Drum cleaning prompt settings Not used. 0: OFF 0: ON 1: ON 1: OFF NOTE: Selector 4 is applicable to the European version only. l Selector 4: Duty cycle control of pulsed current for the heat-fixing unit Setting this selector to "1" activates the duty cycle control that suppresses the rush current. The duty cycle is 10-ms ON and 20-ms OFF. However, the duty cycle control may emit switching noise to the AC line. Depending upon the codes and regulations in the country, this selector should be set to "0." l Selector 5: Drum cleaning prompt settings Setting this selector to "1" (OFF) deactivates all of the drum cleaning prompt settings enabled by selectors 5 to 7 of WSW42. V - 40