Brother International 1920CN Service Manual - Page 84
Disconnect the short heater wire of the heater harness from the left end of the heat-fixing
UPC - 012502607137
View all Brother International 1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
(4) Remove three screws (two "a" and one "b"). (5) Disconnect the long heater wire (of the heater harness) from the upper center of the heat- fixing unit. (6) Disconnect the short heater wire (of the heater harness) from the left end of the heat-fixing unit. (7) Lift up the heat-fixing unit and disconnect the heater thermistor harness from the engine PCB. "a": Stepped screw "b": Taptite, cup S M3x8 IV - 38
IV
- 38
(4)
Remove three screws (two "a" and one "b").
(5)
Disconnect the long heater wire (of the heater harness) from the upper center of the heat-
fixing unit.
(6)
Disconnect the short heater wire (of the heater harness) from the left end of the heat-fixing
unit.
(7)
Lift up the heat-fixing unit and disconnect the heater thermistor harness from the engine PCB.
"a":
Stepped screw
"b":
Taptite, cup S M3x8