Brother International 1920CN Service Manual - Page 29
Installing the update data onto the flash ROM of the machine, type the following
UPC - 012502607137
View all Brother International 1920CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing the update data onto the flash ROM of the machine (1) Copy the update data and transfer utility onto the desired directory of the hard disk. e.g., C:\UPDATE (2) Click the Start button, point to Programs, and then click MS-DOS Prompt to open an MSDOS window. (3) Type the drive letter where the update data and transfer utility are located. In the above example, type C:\ from the command line and press the ENTER key. Then type CD UPDATE and press the ENTER key. (4) Check that your computer is connected with the machine correctly. (5) To start the transfer utility transmitting the update data to the flash ROM of the machine, type the following: ICEN filename /b Then press the ENTER key. During downloading, the machine beeps intermittently. Upon completion of the downloading, the machine beeps continuously. NOTE: If the machine cannot return to the standby state after completion of downloading, turn the power off and on. II - 2