Brother International 2600CN Users Manual - English - Page 191
Release the Fusing Unit, Open the Top Cover.
UPC - 012502601579
View all Brother International 2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
If the paper is caught in the Fusing Roller, follow the steps below: 1) Open the Top Cover. 2) Release the Fusing Unit Pressure Release Levers on both sides. 3) Remove the jammed paper at the rear side of the printer by holding it with both hands and pulling it slowly toward you. 4) Lock the Fusing Unit Pressure Release Levers and close the Top Cover. 4. Close the Rear Access Cover. CHAPTER 6 TROUBLE SHOOTING Fig. 6-5 Fig. 6-6 ! Caution • Do not touch the toner surface of the jammed paper. It might stain your hands or clothes. • After removing the jammed paper and the next printed page is stained with toner, print several test pages before restarting your print job. • Remove the jammed paper carefully to prevent spreading toner. • Take care not to stain your hands and clothes. Wash toner stains immediately with cold water. • Never touch the transfer roller. • If the paper in the paper cassette is creased at the edges, paper jams can occur. To avoid this, please turn the paper over. 6-13