Brother International 2700CN Users Manual - English - Page 101
SO-DIMM, The printer is not compatible with Extended Data Output EDO DIMM. - printer hl
UPC - 012502607670
View all Brother International 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
SO-DIMM We recommend that you expand the printer memory to avoid any MEMORY FULL errors. The HL-2700CN printer has 64 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 576 MB by installing a commercially available SO-DIMM (Dual In-line Memory Module). The printer uses memory modules that are: 144 pins, no-parity, SDRAM with 64 MB or more. The printer is not compatible with Extended Data Output (EDO) DIMM. The following SO-DIMM sizes can be installed: ■ 64 MB ■ 128 MB ■ 256 MB TechWorks TechWorks TechWorks 12345-0001 12462-0001 12469-0001 ■ 64 MB ■ 128 MB ■ 256 MB ■ 512 MB Buffalo Technology Buffalo Technology Buffalo Technology Buffalo Technology VN133-64M VN133-128M VN133-256M VN133-512M For more information, visit Techworks web site at www.techworks.com In general, SO-DIMM must have the following specifications: Type: CAS latency: Clock frequency: Capacity: DRAM type: 144 pin and 64 bit output 2 or 3 100 MHz or more 64 MB to 512 MB SDRAM ■ The printer's standard memory can vary depending on the printer model and the country. ■ There might be some SO-DIMMs that will not work with this printer. ■ For more information, call the dealer you bought the printer from or Brother Customer Service. ■ For the latest information, visit the Brother Solutions Center at http://solutions.brother.com 4 - 13 OPTIONS