Brother International 5250DN Network Users Manual - English - Page 17
Using the control panel to con your machine for a network (for HL-5270DN) - network setup
![]() |
UPC - 012502614449
View all Brother International 5250DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Configuring your network printer 3 Select Search Active Devices from the Devices menu. BRAdmin Professional will search for new devices automatically. 2 Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as APIPA in the BRAdmin Professional utility screen. • You can find the node name and Ethernet address (Node Address above) by printing out the Printer Settings Page. See Printing the Printer Settings Page on page 7-6 for information on how to print the Printer Settings Page on your print server. 4 Double-click the unconfigured device. 5 Enter the IP address, Subnet Mask and Gateway (if needed) of your print server. 6 Click OK. 7 With the correctly programmed IP address, you will see the Brother print server in the device list. Using the control panel to configure your machine for a network (for HL-5270DN) You can configure your network printer using the control panel Network menu. See Control panel setup on page 7-1. Using other methods to configure your network printer You can configure your network printer using other methods. See Other ways to set the IP address (for advanced users and administrators) on page A-1. 2 - 4
![](/manual_guide/products/brother-international-hl5250dn-network-users-manual-english-b4138d6/17.png)