Brother International AX22 User's Manual - English - Page 7

BASIC TYPING Selecting pitch Your typewriter offers two typing pitches: Pica (10 pitch): 10 characters per inch Elite (12 pitch): 12 characters per inch To change the pitch, the carrier must be at the left margin. The pitch LED is ON if you choose Elite but stays OFF if Pica is selected. Selecting line spacing You have a choice of single space, 11/2 space and double space. The LEDs above the selector will light according to your choice; if you choose a one-line-and-a-half spacing, both LEDs will light. Setting margins Left margin 1) Move the carrier to the desired position using the SPACE bar, the BACKSPACE or MARGIN RELEASE key as required. 2) Press the LEFT MARGIN key. The left margin is now set. Right margin 1) Move the carrier to the desired position using the SPACE bar, the BACKSPACE or MARGIN RELEASE key as required. 2) While holding down the CODE key, press the RIGHT MARGIN key to set the right margin. Margin release To move the carrier past an existing margin, press the MARGIN RELEASE key. 1) To move to the left of the left margin, backspace to the left margin, press the MARGIN RELEASE key and then continue to backspace. 2) To move past the right margin, hold the SPACE bar until the carrier reaches the right margin. Press the MARGIN RELEASE key, then continue spacing using the SPACE bar. 3