Brother International BAS-310 Instruction Manual - English - Page 24
Operation, Chart
View all Brother International BAS-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
OPERATION FLOW CHART, ,START] Power switch on Insert floppy disk Press the PRO No. switch. --. Press the R/W switch. 4- Reads program from disk. 4- Set the work piece. Depress presser foot lifter -. 4- Work clamp descends. threadle. Test switch on 4- Test lamp illuminates. Depress start treadle -. 4- Presser foot stops at sewing start position. Depress start treadle .-Feed drive (pulse motor) (confirm needle descent, presser foot and work clamp operation.) To change pattern ) Power switch on Press the PRO No. switch Select the program number. Press the R/W switch. 4-Read program from disk. Press the presser foot lifter switch (if the work clamp is down). 4- Work clamp rises. Replace presser foot, feed plate; confirm needle descent. Set material in placb. Depress presser foot lifter treadle. 4- Feed stop Test switch off 4- Test lamp goes out. Depress start treadle 4- Machine, feed operate. Max. 2,OOO spm. 4- Stop thread cutting Work clamp rises One machine cycle completed E When thread breaks or bobbin thread runs out Press emergency stop swtich. 4- Machine stops, alarm sounds. Remove problem Press emergency stop switch. 4-Thread cutter operates, alarm stops. Press step back switch. 4- Presser foot moves one stitch at a time in reverse direction. Press step back switch. 4- Presser foot stops. -21 -