Brother International BAS-310 Instruction Manual - English - Page 5
Installation
View all Brother International BAS-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION El Positioning El Installation of spool stand Press Determine the position for the sewing machine, and then lock the casters 0 so that the sewing machine will not move. Install the spool stand to the table. [1] Cord connections 4. For pneumatic pedal Installation of eye guard iii 0 Connect the cords for the treadle 0 , disk drive unit 0 and disk drive ground wire 0 , and the programmer 0 tro their respective terminals. Install the eye guard 0 on the machine head. El Tilting the sewing machine head 6 O (1) Remove bolt 0 at the back of the work table, and remove belt cover D Q. (2) Remove head lock bolt 0. (3) Disconnect chain hook S 0 hooked on treadle 0. -2- (4) Stand at the left side of the table, and gently tilt the machine towards you. When returning the machine to the original position, be careful of the rotary hook cover 0 and the cord.