Brother International BAS-310 Instruction Manual - English - Page 8
counterclockwise.
View all Brother International BAS-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
0 00 p J • SPEED TEST O •■ • 5-'117/1`.1, 9 STEP BACK * (3) Turn the power switch 0 on. (The power indicator on the operation panel will light.) (4) Press and hold the step-back switch 0 on the operation panel, and depress the starting pedal to start the sewing machine. Keep the start switch depressed until the bobbin is fully wound. (Release the step-back switch 0 when the sewing machine starts.) (5) The bobbin holder 0 will automatically return when the bobbin is filled to capacity (approximately 80 - 90% of the bobbin diameter.) (6) Release the starting pedal 0. (7) Remove the bobbin, and pull the bobbin in the direction of the arrow to cut the thread on the thread cutter 0. (8) To wind more thread onto the bobbin, loosen set screw 0 to move the bobbin holder 0 out. If the bobbin thread is wound unevenly onto the bobbin, loosen nut 0, and turn thread tension stud 0 to adjust • so that the thread is wound evenly. If the bobbin is wound as in Fig. A, turn the stud clockwise; if Fig. B, turn the stud counterclockwise. Fig. A Fig. B