Brother International BAS-311G Basic Instruction Manual - English - Page 32
Brother International BAS-311G Manual
View all Brother International BAS-311G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. PREPARATION BEFORE SEWING 4-6. Home position detection 2979B Before starting home position detection, check that the needle bar is at its highest position. Turn the pulley (1) in the direction of the arrow until the ridge at the bottom of the thread take-up (2) is aligned with the processed line on the arm. Aligned 5223Q 4421Q 1. Turn on the power switch. The power indicator (3) will illuminate, and the model number will appear in the PROGRAM No. display (4) and the specifications class will appear in the menu display (5). Specifications Motor-driven work clamp Pneumatic work clamp [ELEC] [ Air] After this, the program number will flash in the PROGRAM No. display (4). 4952Q 2nd step 2. Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, lower the work clamp before depressing the start switch (6).) The sewing machine will move to the home position and the work clamp will rise. * For programs with a large number of stitches, the buzzer will sound after the home position is detected, and then the feed mechanism will move to the sewing start position. NOTE: If error "E110" appears when the foot switch is depressed, turn the pulley (1) in the direction of operation to clear the error. 4441Q 4953Q 24 BAS-300G, BAS-311G, BAS-326G