Brother International BAS-311G Basic Instruction Manual - English - Page 42
Brother International BAS-311G Manual
View all Brother International BAS-311G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6. SEWING 6-2. Using the STOP switch If you press the STOP switch (1) while sewing or test feeding is in progress, the CAUTION indicator (2) will illuminate and the sewing machine will stop immediately. 2264B 1. Press the RESET key (3). • The thread will be trimmed, and then the CAUTION indicator (2) will switch off and the buzzer will stop sounding. 2. If you do not wish to continue sewing, press the RESET key (3) once more. • The program number will flash. Carry out preparation for the next sewing. 4982Q If you have pressed the STOP switch (1) at times such as if the thread breaks while sewing or the lower thread runs out, you can resume sewing from the point where the thread ran out. 1 Press the RESET key. • The thread will be trimmed, and then the CAUTION indicator will switch off and the buzzer will stop sounding. Press the key to return to the position where sewing stopped. key, the feed mechanism will move backward • When you press the key, it will move forward one stitch at a time, and when you press the one stitch at a time. (The feed will move quicker if you keep the key pressed down.) 4443Q 2 3 2nd step Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, depress the start switch.) • The sewing machine will start operating and sewing will start. 4441Q 6-3. Using the thread wiper switch The thread wiper switch (1) can be used to turn the thread wiper (2) on and off. 4983Q 34 BAS-300G, BAS-311G, BAS-326G