Brother International BAS-311G Basic Instruction Manual - English - Page 37
Brother International BAS-311G Manual
View all Brother International BAS-311G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-6. Checking the sewing pattern Use test feed mode to check the needle movement with only the feed mechanism operating. Check that the needle hole does not come out from the frame of the work clamp. 1 Press the TEST key. TEST indicator illuminates 2 Select the program number to be checked, and then set the X-scale and the Y-scale. • The program number will flash. Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, lower the work clamp before depressing the start switch.) • The feed mechanism will move to the home position and the program number will stop flashing and illuminate steadily. • The number of stitches will appear in the menu display. 2nd step 3 COUNTER indicator illuminates Starting continuous test feed mode 1st step 2nd step 4957Q 4441Q Depress the foot switch to the 2nd step and then release it. (If using a two-pedal foot switch, lower the work clamp before depressing the start switch and releasing it.) • Feed mechanism starts moving continuously one stitch at a time. [Fast-forward test mode] If you depress the foot switch to the 1st step while the feed mechanism is moving, the feeding speed will become faster while the foot switch is being depressed. (If using a two-pedal foot switch, depress the work clamp switch.) 4441Q 4443Q key, the feed mechanism will move If you press the forward one stitch at a time, and if you press the key, the feed mechanism will move backward one stitch at a time. (The feed will move quicker if you keep the key pressed down.) TEST indicator illuminates If you would like sewing to start while test feeding is in progress, press the TEST key to switch off the TEST indicator. When you depress the foot switch to the 2nd step, sewing will start. (If using a two-pedal foot switch, depress the start switch.) 4441Q 2nd step TEST indicator switches off 4 If test feeding continues to the final stitch, it will then stop. Press the TEST key. TEST indicator switches off BAS-300G, BAS-311G, BAS-326G 29