Brother International BAS-342E Instruction Manual - English - Page 34

Sewing, CAUTION

Get Brother International BAS-342E PDF manuals and user guides View all Brother International BAS-342E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

7. Sewing A CAUTION 7. Sewing Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. • Threading • When replacing the bobbin and needle • When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to be machine. 7-1. Before starting sewing.... • Check that the needle bar is at the highest position. Turn the machine pulley so that the index mark 0 on the pulley is almost aligned with the point where belt cover U and belt cover D meet. * If the machine is started while the index mark 0 is 0 not correctly aligned, error message "E-22" will be displayed (only when memory switch No.14 is on). 7-2. Sewing operation ■ • • • 1. Turn the power switch 0 on. (The power indicator on the operation panel will light.) 2. Insert the floppy disk 0. 3. Press the PRO. No. selection switch 0 to select the desired program number. 4. Press R/W switch 0. • The floppy disk drive indicator will light and the program no. display 0 will show a P while the data is being read. When reading is completed, an alarm will sound and the indicator will go out, then the program no. display 0 will blink the program number. BAS-341E • 342E 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
7.
Sewing
7.
Sewing
A
CAUTION
Turn
off
the
power
switch
at
the
following
times,
otherwise
the
machine
may
operate
if
the
foot
switch
is
depressed
by
mistake,
which
could
result
in
injury.
•
Threading
•
When
replacing
the
bobbin
and
needle
•
When
not
using
the
machine
and
when
leaving
the
machine
unattended
Do
not
touch
any
of
the
moving
parts
or
press
any
objects
against
the
machine
while
sewing,
as
this
may
result
in
personal
injury
or
damage
to
be
machine.
7-1.
Before
starting
sewing
....
0
7-2.
Sewing
operation
■
•
•
•
•
Check
that
the
needle
bar
is
at
the
highest
position.
Turn
the
machine
pulley
so
that
the
index
mark
0
on
the
pulley
is
almost
aligned
with
the
point
where
belt
cover
U
and
belt
cover
D
meet.
*
If
the
machine
is
started
while
the
index
mark
0
is
not
correctly
aligned,
error
message
"E-22"
will
be
displayed
(only
when
memory
switch
No.14
is
on).
1.
Turn
the
power
switch
0
on.
(The
power
indicator
on
the
operation
panel
will
light.)
2.
Insert
the
floppy
disk
0.
3.
Press
the
PRO.
No.
selection
switch
0
to
select
the
desired
program
number.
4.
Press
R/W
switch
0.
•
The
floppy
disk
drive
indicator
will
light
and
the
pro-
gram
no.
display
0
will
show
a
P
while
the
data
is
being
read.
When
reading
is
completed,
an
alarm
will
sound
and
the
indicator
will
go
out,
then
the
program
no.
display
0
will
blink
the
program
num-
ber.
BAS
-341E
•
342E
27