Brother International BAS-416 Service Manual - Page 76
S_porta
View all Brother International BAS-416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5-6-7. Port function • Settings of switch and sensor signals are indicated with respect to the level of input port terminal on the JO circuit board. • This is used to display settings of DIP switches on main circuit board and keyboard circuit board, and speed level. Results of checking RS232C interface on the main circuit board will appear. _ Port MSB • Check LSB Checking switches and sensors • Press the key allocated the port you want to check. Selection key Thread trimming Hoop feed Needle set Needle select Thread sensor Port name S_PORTA S _ PORTB Details Input signal level for portA on 1O circuit board Input signal level for portB on 1O circuit board Input signal level for portC on 1O circuit S _ PORTC board Setting of DIP switch on main circuit M _PORTSW board Setting of DIP switch on keyboard circuit K _PORTSV board, speed level Thread sensor signal check EDIT RS232C port check 3 _ Port Check * MSB******** LSB / Port name Speed level will appear when the key is pressed. Input port level 1 = H level 0=Llevel Each time the sensor or switch setting is changed (shield or release sensor, or turn switch on or off), the corresponding bit number will alternate between 1 and 0 along with a beep. 1. Press the key to return to the port selection menu. 2. Press the key to return to the test mode menu. 69 BAS-401 412A - 416A BES-1210AC