Brother International BAS-761 Instruction Manual - English - Page 18
Bobbin thread winding, idles for a long time or if
View all Brother International BAS-761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
5. Correct operation 5-4. Bobbin thread winding e w q 1. Pass the bobbin thread from the spool stand as illustrated below. 2. Wind the thread around the bobbin q as arrwed. 3. Press lever w against the bobbin q. 4. After completing bobbin q thread winding, cut the thread. Note: Check for any idle rotation of the bobbin q. The motor may overheat, if the bobbin q idles for a long time or if it rotates without a bobbin. At this time, protector e will go up and the bobbin thread winding motor will not start. If protector e is pressed after about 20 seconds has elapsed, bobbin theread winding can be restarted. 11 BAS-761
11
BAS-761
5-4. Bobbin thread winding
1.
Pass the bobbin thread from the spool stand as illustrated below.
2.
Wind the thread around the bobbin
q
as arrwed.
3.
Press lever
w
against the bobbin
q
.
4.
After completing bobbin
q
thread winding, cut the thread.
Note:
Check for any idle rotation of the bobbin
q
. The motor may overheat, if the bobbin
q
idles for a long time or if
it rotates without a bobbin. At this time, protector
e
will go up and the bobbin thread winding motor will not
start. If protector
e
is pressed after about 20 seconds has elapsed, bobbin theread winding can be restarted.
q
w
e
5. Correct operation