Brother International BAS-761 Instruction Manual - English - Page 31
Read sewing data., PROGRAM NUMBER, Screen 9
View all Brother International BAS-761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
8. Preparation for sewing 4. Insert a floppy disk. Note: Insert a floppy disk straight into the slot. The label side of the disk must face the front. 5. Press the FLOPPY button y. Screen 9 will then be displayed. Read sewing data. PROGRAM NUMBER _ _ Screen 9 Use the arrow keys !8 to select the same number as the work clamp assembly. Then use the [ ] and [ ] arrow keys !8 to select the column, and use the [ ] and [ ] arrow keys !8 to change the values. Refer to page 35 for details on setting the work clamp assembly number. 6. Press the ENTER button !6. The sewing data which corresponds to the number specified will then be read from the floppy disk. * The sewing data will be backed up even when the power is turned off. The number for the backed-up sewing data can be checked by viewing the program number on screen 8-1 or screen 8-3. 1997/11/5 19:36:50 PROGRAM NUMBER PIECE COUNTER BOBBIN COUNTER NOTE: If there is no backup data, the display will be blank. Screen 8-3 7. Check that the THREAD MONITOR indicator o is illuminated. If it is switched off, press the THREAD MONITOR button o until the indicator is illuminated. NOTE: If the indicator is switched off, the machine head will not stop automatically if an upper thread breakage is detected during sewing. 8. If starting to sew with a new bobbin, set the lower thread counter by following the steps given on page 20. 9. Follow the steps given on page 21 to reset the piece counter to "0" if required. 10. Follow the steps given on page 18 to set the sewing speed if required. 11. If the STACKER indicator r is switched off, press the STACKER button r so that the indicator illuminates. NOTE: If the indicator is switched off, the workpieces will not be stacked after they have been sewn. BAS-761 24