Brother International BAS-761 Instruction Manual - English - Page 28
Setting the piece counter, 7-5. Setting the stacker roller feed amount, Change piece counter.
View all Brother International BAS-761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
7. Settings before sewing 7-4. Setting the piece counter ¡ This setting can be made when the machine head is at the standby position and while the bobbin is being replaced. ¡ The piece counter can be set to "0" (reset), or it can be decremented by 1, It cannot be incremented. Change piece counter. 1. Press the COUNTER button i twice. Screen 4 will then be displayed. PIECE COUNTER 1234 Screen 4 2. Press the FAST button !3 to reset the piece counter to "0". Press the arrow key !8 once to decrement the piece counter by 1. * If the CANCEL button !5 is pressed, the piece counter value will not be changed and the screen will return to the original display. 3. Press the ENTER button !6. The piece counter will be changed to the new setting, and the screen will return to the initial display. 7-5. Setting the stacker roller feed amount ¡ This setting can be made when the machine head is at the standby position and while the bobbin is being replaced. Change stack feed length. 1. Press the COUNTER button i three times. Screen 5 will then be displayed. STACK FEED LENGTH 250 mm Screen 5 2. Press the arrow keys !8 to select the desired stacker roller feed amount. The setting can be made in 9 steps from 0 mm to 400 mm, with each step being 50 mm. 3. Press the ENTER button !6. The stacker roller feed amount will be changed to the new setting, and the screen will return to the initial display. 21 BAS-761