Brother International BAS-761 Instruction Manual - English - Page 34
Sewing with the folder in label attachment mode, Press the RESTART buttones
View all Brother International BAS-761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
9. Sewing 9-3. Sewing with the folder in label attachment mode ¡ Two types of label attachment mode can be used: when DIP switch D-2 is set to OFF, alternate label attachment is carried out, and when DIP switch D-2 is set to ON, continuous label attachment is carried out. ¡ With alternate label attachment, the folder switches alternately between label attachment mode and automatic mode once for each sewing operation. During label attachment mode, the LABEL indicator e illuminates. If you would like to switch over the modes, press the LABEL button e. ¡ With continuous label attachment, label attachment mode is active all the time. (The LABEL indicator e will remain illuminated.) r e u t q o i y @3 @4 1. Set the folder mode to label attachment mode. NOTE: Refer to page 18 for details on how to set the folder mode. 2. Press the STACKER button r so that the STACKER indicator is illuminated. 3. Place the workpiece t under the gauge assembly q. (*1) 4. Depress the foot switch @3. The vacuum system will start operating to hold the workpiece t in place. 5. Place the pocket material y on top of the gauge assembly q. 6. Depress the foot switch @,3 and hold it in that condition. The intermediate work clamp u will be set down on top of the gauge assembly q and label setting will be possible. Place the label i into the clamp o of the label attacher. After setting the label i in place, release the foot switch @.3 The clamp o of the label attacher will clamp the label i and then rotate to the folding position. If you would like to reclamp the label i, depress the foot switch @3 once more and keep it depressed. The label can then be reset. 7. Press the RESTART buttones @4 simultaneously. The pocket material y will be folded by the folder and the workpiece t and the pocket material y will then be moved to the machine head and sewing will start. (*2) 8. Once sewing is finished, the stacker will operate and the workpiece w will be stacked. The machine head and the work clamp will then return to the standby positions. * If the LABEL indicator e is switched off, it means that automatic mode is active. *1 If DIP switch D-1 has been set to ON, the gauge assembly q will retract. The gauge assembly q moves forward at the same time the vacuum system starts operating when the foot switch @3 is depressed. *2 If DIP switch A-1 has been set to ON, operation stops momentarily after folding has been completed so that the folding can be checked. When the RESTART buttones @4 are pressed again simultaneously, operation continues as before. 27 BAS-761