Brother International BAS-761 Instruction Manual - English - Page 44
DIP switch E
View all Brother International BAS-761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
11. Using the DIP switches ¡ DIP switch C No. Functions when ON 1 7 stitches counted before upper thread breakage is detected OFF: 3 stitches counted before upper thread breakage is detected 2 After sewing, the work clamp and machine head return to the previous standby position, even if folding has been completed. 3 Movement to the feed destination occurs immediately when the program data requires it. 4 After sewing, the timer starts 0.2 seconds after the work clamp is raised. 5 Not available (Should be set to OFF) 6 Not available (Should be set to OFF) 7 Not available (Should be set to OFF) 8 Not available (Should be set to OFF) ¡ DIP switch D No. Functions when ON 1 The gauge standby position is always forward. When OFF: The gauge standby position is at the back. 2 Continuous label attachment mode When OFF: Alternate label attachment mode 3 Folder operates at low speed 4 Folder procedure changes 5 Folding is released when base 1.5 is raised 6 Not available (Should be set to OFF) 7 Not available (Should be set to OFF) 8 Not available (Should be set to OFF) ¡ DIP switch E No. 1 2 3 4 5 6 7 8 Functions when ON Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) Not available (Should be set to OFF) 37 BAS-761