Brother International BM-917B Instruction Manual - English - Page 10
Installation, Caution
View all Brother International BM-917B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. INSTALLATION 5. INSTALLATION CAUTION The sewing machine should only be installed by a qualified technician. Ask your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weights more than 25 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete, otherwise the machine will operate if the pedal is pressed by mistake, which coud result in injury. Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. 5-1. Installing the machine head 1968M 1. Install the machine head to the table with the four bolts (1). 2. Install the pedal (2) to the pipe of the table. 3. Loosen the bolt (3), and then open bed cover R (4). 4. Tilt back the machine head. 5. Attach the chain to the clutch driving lever (5) and the pedal (2). 6. Use the hook (6) to adjust the length of the chain. 7. Return the machine head to its original position, and then tighten the bolt (3). Pedal stoppers 1969M 8. Remove the screw (7) from the face plate, and then install the needle bar cover (8). 9. Install the eye guard (9) with the bolt (10). 1970M BM-917B, 917C 4