Brother International DCP 385C Users Manual - English - Page 63

How to set new default, How to reset to the factory settings, Understanding the Error Messages - troubleshoot

Page 63 highlights

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive How to set new default 5 You can set your own default settings. a Press (Scan). b Press a or b to choose Scan to Media. Press OK. c Press a or b to choose Set New Default. Press OK. d Press + to choose Yes. e Press Stop/Exit. How to reset to the factory settings 5 You can restore all the settings you have changed to the factory settings. a Press (Scan). b Press a or b to choose Scan to Media. Press OK. c Press a or b to choose Factory Reset. Press OK. d Press + to choose Yes. e Press Stop/Exit. Understanding the Error Messages 5 Once you are familiar with the types of errors that can occur while you are using PhotoCapture Center®, you can easily identify and troubleshoot any problems. „ Hub is Unusable. This message will appear if a Hub or USB Flash memory drive with a Hub has been put into the USB direct interface. „ Media Error 5 This message will appear if you put in a memory card that is either bad or not formatted, or when there is a problem with the media drive. To clear this error, take out the memory card. „ No File This message will appear if you try to access a memory card or USB Flash memory drive in the drive (slot) that does not contain a .JPG file. „ Out of Memory This message will appear if you are working with images that are too large for the machine's memory. This message will also appear when a memory card or USB Flash memory drive you are using does not have enough space available for the scanned document. „ Media is Full. This message will appear if you are trying to save more than 999 files in a memory card or USB Flash memory drive. „ Unusable Device This message will appear if a USB device or USB Flash memory drive that is not supported has been connected to the USB direct interface. (For more information, visit us at http://solutions.brother.com.) This message can also appear if you connect a broken device to the USB direct interface. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
51
5
How to set new default
5
You can set your own default settings.
a
Press
(
Scan
).
b
Press
a
or
b
to choose
Scan to Media
.
Press
OK
.
c
Press
a
or
b
to choose
Set New Default
.
Press
OK
.
d
Press
+
to choose
Yes
.
e
Press
Stop/Exit
.
How to reset to the factory
settings
5
You can restore all the settings you have
changed to the factory settings.
a
Press
(
Scan
).
b
Press
a
or
b
to choose
Scan to Media
.
Press
OK
.
c
Press
a
or
b
to choose
Factory Reset
.
Press
OK
.
d
Press
+
to choose
Yes
.
e
Press
Stop/Exit
.
Understanding the
Error Messages
5
Once you are familiar with the types of errors
that can occur while you are using
PhotoCapture Center
®
, you can easily
identify and troubleshoot any problems.
Hub is Unusable.
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory. This message will
also appear when a memory card or USB
Flash memory drive you are using does
not have enough space available for the
scanned document.
Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface. (For more information,
.)
This message can also appear if you
connect a broken device to the USB direct
interface.