Brother International DCP-8085DN Users Manual - English - Page 95

Copy operation in progress, Start, Stop/Exit, Error Message, Cause, Action, Paper jams - fuser assembly

Get Brother International DCP-8085DN PDF manuals and user guides
UPC - 012502622703
View all Brother International DCP-8085DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Error Message Fuser Error Jam Duplex Jam Rear Jam Inside Jam MP Tray Jam Tray 1 Jam Tray 2 No Paper No Toner No Tray Out of Memory Print Unable XX Protected Device Cause Action The temperature of fuser unit Turn the power switch off, wait a few does not rise at a specified seconds, and then turn it on again. Leave the temperature within specified time. machine for 15 minutes with the power on. The fuser unit is too hot. The paper is jammed in the duplex tray. (See Paper jams on page 86.) The paper is jammed in the back (See Paper jams on page 86.) of the machine. The paper is jammed inside the (See Paper jams on page 86.) machine. The paper is jammed in the MP (See Paper jams on page 86.) tray of the machine. The paper is jammed in the paper (See Paper jams on page 86.) tray of the machine. The machine is out of paper or paper is not properly loaded in the paper tray. Do one of the following: „ Refill the paper in the paper tray or MP tray. „ Remove the paper and load it again. The toner cartridge or the drum Re-install the toner cartridge or the drum unit unit and toner cartridge assembly and toner cartridge assembly. is not installed properly. The paper tray is not completely Close the paper tray properly. closed. The machine's memory is full. Copy operation in progress Do one of the following: „ Press Start to copy the scanned pages. „ Press Stop/Exit and wait until the other operations in progress finish, and then try again. „ Clear the data from the memory. (See Out of memory message on page 40.) Print operation in process Reduce print resolution. (See Advanced tab in the Software User's Guide on the CDROM.) The machine has a mechanical Disconnect the machine from the power for problem. several minutes, then reconnect it. The protect switch of the USB Flash memory drive is on. Turn off the protect switch of the USB Flash memory drive. 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
82
Fuser Error
The temperature of fuser unit
does not rise at a specified
temperature within specified time.
Turn the power switch off, wait a few
seconds, and then turn it on again. Leave the
machine for 15 minutes with the power on.
The fuser unit is too hot.
Jam Duplex
The paper is jammed in the
duplex tray.
(See
Paper jams
on page 86.)
Jam Rear
The paper is jammed in the back
of the machine.
(See
Paper jams
on page 86.)
Jam Inside
The paper is jammed inside the
machine.
(See
Paper jams
on page 86.)
Jam MP Tray
The paper is jammed in the MP
tray of the machine.
(See
Paper jams
on page 86.)
Jam Tray 1
Jam Tray 2
The paper is jammed in the paper
tray of the machine.
(See
Paper jams
on page 86.)
No Paper
The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
Refill the paper in the paper tray or MP
tray.
Remove the paper and load it again.
No Toner
The toner cartridge or the drum
unit and toner cartridge assembly
is not installed properly.
Re-install the toner cartridge or the drum unit
and toner cartridge assembly.
No Tray
The paper tray is not completely
closed.
Close the paper tray properly.
Out of Memory
The machine’s memory is full.
Copy operation in progress
Do one of the following:
Press
Start
to copy the scanned pages.
Press
Stop/Exit
and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message
on page 40.)
Print operation in process
Reduce print resolution. (See
Advanced tab
in the
Software User’s Guide
on the CD-
ROM.)
Print Unable XX
The machine has a mechanical
problem.
Disconnect the machine from the power for
several minutes, then reconnect it.
Protected Device
The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
Error Message
Cause
Action