Brother International DZ1500F Operation Manual - Page 23
Invisible Zipper Foot, 4 Foot
View all Brother International DZ1500F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Invisible Zipper Foot 1 Attach invisible zipper foot. 2 Align zipper with fabric. Mark the base of the opening approximately 2 cm above the end of the zipper. Teeth Slide 2 cm Baste Base of Opening 3 Baste the zipper position. 4 Separate the seam allowance. 5 With the zipper mounted, baste just the seam margin on one side of the zipper. 6 Close the zipper and baste the other side of the zipper. 7 Remove the basting at the zipper position. Basting Basting 8 Fit the zipper teeth into the presser foot groove, guide them to prevent them from falling over, and sew to the base of the opening. ✽✽ When sewing with the teeth to the right, the left side of the foot should line up with the left teeth of the zipper. 1/4" Foot ●● Sewing machine settings: Stitch length = 2 - 2.5 mm • Sew a consistent seam allowance (1/4", 6.4 mm) when piecing together a quilt. Seam allowance (1/4", 6.4 mm) • Use guides (mark) to begin, end, or pivot 1/4" from edge of fabric. Beginning of stitching Align this mark with edge of fabric End of stitching Align this mark with edge of fabric • Accurately top stitch 1/8" from seam. Top of fabric Seam (1/8", 3.2 mm) 21