Brother International DZ1500F Operation Manual - Page 26
Caring for Your Machine
View all Brother International DZ1500F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Caring for Your Machine Cleaning the Machine CAUTION Make sure the power to the machine is off before cleaning sewing machine. 1 Turn machine off. 2 Remove foot. 3 Remove needle plate. 4 Clean out dust and thread scraps. ✽✽ Thread scraps can be swept out through the bobbin door. 5 When the area under the needle plate is cleaned out, oil hook of bobbin case with sewing machine oil. ✽✽ Use a cloth to clean the machine of any excess oil. 6 Attach needle plate and foot. 24 Hook Lubrication Points ●● When using the sewing machine every day, apply a few drops of oil to each location indicated twice a month. ✽✽ Use a cloth to wipe the machine clean of any oil spilled near the lubrication points. ■■ Keep Your Sewing Machine Clean Please use a soft, dry cloth to wipe off light dirt and dust. If sewing machine is very dirty, wipe with a cloth soaked in warm water, or in warm water containing a neutral detergent. Then wipe off any detergent residue, and wipe off water with a dry cloth. ■■ Precautions Please keep sewing machine away from heat sources such as irons and space heaters. Do not use chemicals like benzine or thinner to clean your machine. When machine is not in use, please keep machine out of direct sunlight. Item Sewing Speed (maximum) Stitch Length (pitch) Stroke of Needle Stroke of Thread TakeUp Lever Foot Height Specification 1,500 stitches per minute 0 - 7 mm 34.1 mm 64.7 mm Foot Lift Knee control One Two Over 6 mm 9 mm 10 mm Item Specification Height of feed dog 0.7 mm, 1.1 mm Height of lower needle 3 mm - 3.5 mm Needles that HLX5#9 - #18 may be used SCHMETZ 130/705H #65 - #110 Bed dimensions 439 mm × 178 mm (17 1/4 × 7 inches) Total weight 11 kg (24 1/4 lbs.) 120V model: 120V/15W Sewing Light Parts code: X53061-050 220-240V model: 240V/15W Parts code: 205336-050 Sewing area 595 mm × 285 mm (23 3/8 × 11 1/4 inches)