Brother International FAX-2440C User Guide - Page 60
Overseas Mode, Menu/Set, Stop/Exit, Mono Start
View all Brother International FAX-2440C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
■ If you did not use up any of the numbers for Groups, access codes or credit card numbers, you can 'broadcast' faxes to as many as 136 (FAX-2440C) or 130 (MFC-620CN) different numbers. ■ The available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use Dual Access and Delayed fax. ■ Enter the long dialling sequence numbers as you would normally, but remember that each One-Touch (FAX-2440C only) and Speed-Dial number counts as one number, so the number of locations you can store becomes limited. ■ If the memory is full, press Stop/Exit to stop the job or if more than one page has been scanned, press Mono Start to send the portion that is in the memory. Overseas Mode If you are having difficulty sending a fax overseas due to possible interference on the phone line, we recommend that you turn on the Overseas Mode. After you send a fax using this feature, the feature will turn itself off. 1 If it is not illuminated in green, press 2 Load your document. 3 Press Menu/Set, 2, 2, 7. 4 Press ▲ or ▼ to select On (or Off). (Fax). Press Menu/Set. SETUP SEND 3 - 13