Brother International HL-1660 Users Manual - English - Page 134

CHAPTER 4 CONTROL PANEL If the function is turned on, the downloaded macros and fonts are kept in the printer's memory until the printer is turned off, so that they are not cleared by switching the emulation to the BR-Script 2 mode.  Note The "KEEP PCL" function reserves free space in the printer's memory and may cause a memory full error. If a memory full error occurs, expand the memory capacity or turn off this function. 10. Press the SET switch. The "exit" message appears on the display. 11. Press the SET switch again. The printer exits from the setting mode to the off-line state.  Note When you use the automatic emulation selection, try it with your application software or network server. If the function does not work properly, select a particular emulation mode manually. You can use the following commands to select the emulation on the network. Commands Hex Emulation ESC CR H 1B 0D 48 HP LaserJet 4+ ESC CR AB 1B 0D 41 42 BR-Script 2 ESC CR GL 1B 0D 47 4C HP-GL ESC CR E 1B 0D 45 EPSON FX-850 ESC CR I 1B 0D 49 IBM Proprinter XL About Emulation Modes This printer has the following emulation modes: s HP LaserJet 4+ Mode The HP LaserJet 4+ mode (or HP mode) is the emulation mode where this printer emulates the Hewlett-Packard LaserJet 4+ laser printer. Since a large number of application software packages support this type of laser printer, your printer will operate at its optimum performance in this mode. 4-67