Brother International HL-1660 Users Manual - English - Page 262

USER'S GUIDE s Bar Code Human Readable Line On or Off n = "r0" or "R0" Human readable line OFF n = "r1" or "R1" Human readable line ON Default: Human readable line ON (1) "T5" or "t5" (2) "T6" or "t6" (3) "T130" or "t130" (4) "T131" or "t131" Default: Human readable line OFF All others This parameter specifies whether or not the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. Note that the default setting is subject to the bar code mode selected by "t" or "T". s Quiet Zone n = "onnn" or "Onnn" (nnn = 0 ~ 32767) Quiet Zone is the space on both side of the bar codes. Its width can be specified using the units which are set by the "u" of "U" parameter. (For the description of "u" or "U" parameter, see the next section.) The default setting of Quiet Zone width is 1 inch. s Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing n = "u0" or "U0" n = "u1" or "U1" n = "u2" or "U2" n = "u3" or "U3" n = "u4" or "U4" n = "u5" or "U5" n = "u6" or "U6" n = "u7" or "U7" Millimeters (default) 1/10" 1/100" 1/12" 1/120" 1/10 Millimeters 1/300" 1/720" This parameter specifies the measurement units of X-axis offset, Y-axis offset, and bar code height. Appendix-68