Brother International HL-1660E Users Manual - English - Page 165
When handling the board and before installing or removing it, wear an, antistatic wrist strap
View all Brother International HL-1660E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
CHAPTER 5 OPTIONS 4. Remove the left side cover by sliding it to the rear of the printer. Fig. 5-6 Removing the Left Side Cover 5. Loosen the screws and then slide and remove the metal cover. Screw(Yellow) Fig. 5-7 Removing the Metal Cover 6. Unpack a SIMM and hold it on its edge. Caution SIMM boards may be damaged by even a small amount of static electricity. Do not touch the memory chips or the board surface. When handling the board and before installing or removing it, wear an antistatic wrist strap, or frequently touch the surface of the antistatic package or bare metal on the printer. 5-9
CHAPTER 5 OPTIONS
59
4.
Remove the left side cover by sliding it to the rear of the printer.
Fig. 5-6
Removing the Left Side Cover
5.
Loosen the screws and then slide and remove the metal cover.
Fig. 5-7
Removing the Metal Cover
6.
Unpack a SIMM and hold it on its edge.
Caution
SIMM boards may be damaged by even a small amount of static
electricity. Do not touch the memory chips or the board surface.
When handling the board and before installing or removing it, wear an
antistatic wrist strap, or frequently touch the surface of the antistatic
package or bare metal on the printer.
Screw(Yellow)