Brother International HL 5170DN Network Users Manual - English - Page 43
NetBIOS Port Monitor for Windows® 95/98/Me/ 2000/XP and Windows NT®4.0
UPC - 012502612667
View all Brother International HL 5170DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
NetBIOS Port Monitor for Windows® 95/98/Me/ 2000/XP and Windows NT®4.0 This software requires the TCP/IP transport protocols to be installed on your Windows® 95/98/Me/2000/XP and Windows NT®4.0 computer. To install those protocols refer to your Windows® documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC. Installing the Brother NetBIOS Port Monitor If you already installed the driver from the printers CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation then you do not need to install the Brother Network Print Software again. 1 Start the CD-ROM installation menu program according to the Quick Setup guide. 2 Select the proper model and then the Software Installation menu. Then select the Network Print Software menu to start the Brother Network Print Software installation program. 3 Push the Next button in response to the Welcome message. 4 Select Brother Peer-to-Peer Print (NetBIOS) installation 5 Select the desired directory to install the Brother Network Direct Print files and push Next. 6 Enter the port name that you wish to use. The port name must start with "BNT". For example BNT1. Whichever name you choose, it must be unique. Then press OK. The name must be unique on your PC, however other computers can use the same port name as the name you specify on your PC. 4 - 4 NETBIOS PEER TO PEER PRINTING