Brother International HL-5255DN-MICR MICR Owners Manual - English - Page 89
Dust On Drum, Memory Full, Print Overrun, Service Call Error, Error message, Action
View all Brother International HL-5255DN-MICR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error message Dust On Drum Memory Full Print Overrun Service Call Error 7. Troubleshooting Action See Cleaning the corona wire on page 77. Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel buttons on page 51. Reduce the complexity of your document or cut the print resolution. Add more memory. See Installing extra memory on page 58. Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel buttons on page 51. If this does not clear the error, reduce the complexity of your document or cut the print resolution. Add more memory. See Installing extra memory on page 58. Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program. Change the following settings in the supplied Windows® driver and try again. The best combination of these settings will vary depending on your document: • Graphics mode • TrueType mode • Use Printer TrueType® Fonts Check the LED indication to identify the error. See Service call indications on page 49. 81