Brother International HL-5440D Basic User's Guide - English - Page 81
Cover is Open, No Tray, Jam MP Tray, Jam Tray 1, Jam Inside, Size Error DX, Cancel, Size Mismatch - fuser unit
View all Brother International HL-5440D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
General Information LEDs Machine Status Cover is Open Close the fuser cover located behind the back cover of the machine. Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Go. No Tray The machine cannot detect the standard paper tray. Re-install the standard 3 paper tray, or ensure it is installed correctly. Jam MP Tray / Jam Tray 1 / Jam Tray 2 / Jam Inside Clear the paper jam. See Jam MP Tray / Jam Tray 1 / Jam Tray 2 / Jam Inside uu page 126. If the machine does not start printing, press Go. If the toner cartridge is placed in the machine without the drum unit, put the toner cartridge into the drum unit, and then reinstall the drum unit and toner cartridge assembly in the machine. Size Error DX The paper size defined in the printer driver is not available for automatic duplex printing. Press Cancel. Choose a paper size which is supported by the duplex tray. The paper in the tray is not correct size and is not available for automatic duplex printing. Load the correct size of paper in the tray. The paper size you can use for automatic duplex printing is Letter, Legal or Folio. Size Mismatch Put the same size paper in the paper tray that is selected in the printer driver, and then press Go, or select the size of paper that you loaded in the paper tray. No Paper Put paper in the paper tray you are using. See Loading paper uu page 8. Manual Feed Manual was selected as the paper source when there was no paper in the MP tray. Place paper in the MP tray. If the machine is in Pause mode, press Go. 75