Brother International HL-5470DWT User's Guide - English - Page 92
Network Menu, Submenu 1, Menu Selections, Options, Descriptions
View all Brother International HL-5470DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
General Information Network Menu Submenu 1 Submenu 2 Menu Selections Options Descriptions Wired LAN TCP/IP Boot Method Auto* / Static / RARP / BOOTP / DHCP Chooses the IP method that best suits your needs. IP Address Enter the IP address. (000.000.000.000)* 1 Subnet Mask Enter the Subnet mask. 3 (000.000.000.000)* 1 Gateway 000.000.000.000)* 1 Enter the Gateway address. IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA On* / Off Automatically allocates the IP address from the link-local address range. 1 IPv6 On / Off* Sets use of IPv6 protocol. Ethernet - Auto* / 100B-FD / 100B-HD / 10B-FD / Chooses Ethernet link mode. 10B-HD Wired Status - Active 1000B-FD 2 / Active 100B-FD / Active 100B-HD / Active 10B-FD / Active 10B-HD / Inactive / Wired OFF Shows Ethernet link status. MAC Address - - Shows MAC address of the machine. Set to Default Restores wired network settings of the internal print server to the factory default. Wired Enable - On* / Off Chooses Ethernet link mode. The factory settings are shown in Bold with an asterisk. 86