Brother International HL-5470DWT User's Guide - English - Page 93
Network Menu, continued
View all Brother International HL-5470DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
General Information Network Menu (continued) Submenu 1 Submenu 2 Menu Selections Options Descriptions WLAN TCP/IP Boot Method Auto* / Static / RARP / BOOTP / DHCP Chooses the IP method that best suits your needs. IP Address Enter the IP address. (000.000.000.000)* 1 Subnet Mask Enter the Subnet mask. 3 (000.000.000.000)* 1 Gateway 000.000.000.000)* 1 Enter the Gateway address. IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA On* / Off Automatically allocates the IP address from the link-local address range. 1 IPv6 On / Off* Enables or Disables the IPv6 protocol. Setup Wizard - - Configures the wireless network settings using the setup wizard. WPS/AOSS - - Configures the wireless network settings using WPS or AOSS™ method. WPS w/PIN Code - - Configures the wireless network settings using WPS with a PIN code. The factory settings are shown in Bold with an asterisk. 87