Brother International HL-960 Users Manual - English - Page 112

USER'S GUIDE FONT Switch Pressing the FONT switch allows you to select fonts and symbol/character sets.  Notes When you use the FONT switch, note the following: • The FONT switch is effective in the HP LaserJet 4, EPSON FX850, and IBM Proprinter XL modes. However the settings are subject to the current emulation mode. • If the application software supports font and symbol/character set selection, you do not need to set them with the FONT switch. The software or command setting overrides the switch setting. • If you want to use optional fonts other than the printer's resident fonts, be sure to install a font cartridge/card that has your desired fonts. The printer automatically selects the font that has exactly the same or similar characteristics as those you set through the software or with a command. If the installed font cartridge/card happens to have a font of similar characteristics, the printer will print with an unexpected font. • You can store the fonts you require on a flash memory card or a HDD card only in the HP LaserJet 4 mode when one is installed. See "CARD OPERATION." Setting the Font and Symbol Set in the HP LaserJet 4 Mode When the HP LaserJet 4 emulation mode has been selected, the font and symbol set can be set separately as the primary or secondary font. The display shows the following setting menus: PRIMARY FONT SELECT FONT p Set the primary font. SYMBOL SET p Set the symbol set. TABLE PRINT p Print the code table. exit Exit 4-44