Brother International HL-960 Users Manual - English - Page 92

USER'S GUIDE Display Message PEN SETTING CHARACTER SET Graphics Mode Set the size and percentage of gray separately for six plotter pens. Set the standard and alternate character sets.  Note In most cases, the application software controls the above graphics mode settings, so you do not need to set them in this menu with the MODE switch. The software or command setting overrides the switch setting. Select the setting menu and enter the sub-setting menu to make the settings as follows: s Pen Setting When you select "PEN SETTING," you can set the size and percentage of gray for each plotter pen. You can make settings separately for six pens. Select the pen with the v or w switch and enter the menu with the SET switch. SETTING=PEN1 After you select the pen, advance to the sub-setting menu for size or gray-percentage selection with the v or w switch and enter the menu with the SET switch. When the following message appears, the pen size can be set from 1 dot to 10 dots with the v or w switch: SIZE 1=3 dots * When the following message appears, the shades of gray can be set in 15, 30, 45, 75, 90, or 100% with the v or w switch. GRAY 1=100% * 4-24