Brother International HL-L5100DN Online Users Guide HTML - Page 248
Error Message, Cause, Action, Cancel, in Canada, No Tray T3 - toner reset
View all Brother International HL-L5100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Error Message No Paper MP No Paper T1 No Paper T2 No Paper T3 No Paper T4 No Toner No Tray T1 No Tray T2 No Tray T3 No Tray T4 Out of Memory Print Data Full Print Unable ## Replace Drum Replace Toner Cause Action The MP tray is out of paper, or Do one of the following: paper is not loaded correctly in the • Refill paper in the MP tray. Make sure the MP tray. paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. The machine failed to feed paper from the indicated paper tray. Do one of the following: • Refill paper in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. The toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. If the problem continues, replace the toner cartridge with a new one. The paper tray is not installed or Reinstall the paper tray indicated on the LCD. not installed correctly. The machine's memory is full. Press Cancel and reduce the print resolution. The machine's memory is full. Press Cancel and delete the previously stored secure print data. The machine has a mechanical problem. • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: http://www.brother-usa.com/service It is time to replace the drum unit. Replace the drum unit with a new one. See Related Information: Replace the Drum Unit. The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. See the instructions included with the new drum unit. The toner cartridge is at the end of Replace the toner cartridge with a new one. its life. The machine stops all print operations. 243