Brother International HL-L5100DN Online Users Guide HTML - Page 249
Error Message, Cause, Action, Cancel, printing are Letter, Legal, Mexico Legal, India
View all Brother International HL-L5100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Error Message Self-Diagnostic Size Error Size Error DX Size Mismatch Toner Low Too Many Trays HL-L6300DW Error Message 2-sided Disabled Access Denied Cartridge Error Cooling Down Cover is Open Cause Action The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. The paper size specified in the Press Cancel (if required). machine's paper size setting is not Load the correct size of paper in the tray and available for automatic 2-sided set the tray for that paper size. printing. Choose a paper size supported by 2-sided The paper in the tray is not the printing. correct size and is not available for automatic 2-sided printing. Paper sizes available for automatic 2-sided printing are Letter, Legal, Mexico Legal, India Legal and Folio. The paper in the tray is not the correct size. Load the correct size of paper in the tray indicated on the LCD and set the size of paper for the tray. Press Go. If the LCD displays this message, Order a new toner cartridge now so you have you can still print. The toner it ready when the LCD displays Replace cartridge is near the end of its life. Toner. The number of installed Optional Trays exceeds the maximum number. Reduce the number of Optional Trays. Cause Action The back cover of the machine is Close the back cover of the machine until it not closed completely. locks in the closed position. The 2-sided tray is not installed completely. Install the 2-sided tray firmly in the machine. The function you want to use is restricted by Secure Function Lock 3.0. Call your administrator to check your Secure Function Lock Settings. The toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly. Take out the toner cartridge, and put it back in the drum unit again. Reinstall the toner cartridge and drum unit assembly in the machine. If the problem continues, contact Brother Customer Service or your local Brother dealer. The temperature of the inside of Make sure you can hear the fan in the the machine is too hot. The machine spinning and that the exhaust outlet machine will pause its current print is not blocked. job and go into cooling down mode. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning, disconnect the machine from the power for several minutes, then reconnect it. The front cover is not completely Open and then firmly close the front cover of closed. the machine. 244